Jump to content

Real talk, is water wet?


RedWorks

Recommended Posts

1 minute ago, GODATPVP said:

is redworks drunk at this moment in time ;) jk 

Me, an intellectual, drunk? No, sir, I am not under the influence.

 

I am not a dirty sinner.

I'm just here. playing runescape and fuckin bitches. 

 

¯\_(ツ)_/¯

Link to comment
Share on other sites

Being a liquid, water is not itself wet, but can make other solid materials wet.

Wetness is the ability of a liquid to adhere to the surface of a solid, so when we say that something is wet, we mean that the liquid is sticking to the surface of a material.

Whether an object is wet or dry depends on a balance between cohesive and adhesive forces. Cohesive forces are attractive forces within the liquid that cause the molecules in the liquid to prefer to stick together. Cohesive forces are also responsible for surface tension. If the cohesive forces are very strong, then the liquid molecules really like to stay close together and they won't spread out on the surface of an object very much. On the contrary, adhesive forces are the attractive forces between the liquid and the surface of the material. If the adhesive forces are strong, then the liquid will try and spread out onto the surface as much as possible. So how wet a surface is depends on the balance between these two forces. If the adhesive forces (liquid-solid) are bigger than the cohesive forces (liquid-liquid), we say the material becomes wet, and the liquid tends to spread out to maximize contact with the surface. On the other hand, if the adhesive forces (liquid-solid) are smaller than the cohesive forces (liquid-liquid), we say the material is dry, and the liquid tends to bead-up into a spherical drop and tries to minimize the contact with the surface.

Water actually has pretty high cohesive forces due to hydrogen bonding, and so is not as good at wetting surfaces as some liquids such as acetone or alcohols. However, water does wet certain surfaces like glass for example. Adding detergents can make water better at wetting by lowering the cohesive forces . Water resistant materials such as Gore-tex fabric is made of material that is hydrophobic (water repellent) and so the cohesive forces within the water (liquid-liquid) are much stronger than the adhesive force (liquid-solid) and water tends to bead-up on the outside of the material and you stay dry. 

giphy.gif

Link to comment
Share on other sites

11 minutes ago, Adult Cat said:

Being a liquid, water is not itself wet, but can make other solid materials wet.

Wetness is the ability of a liquid to adhere to the surface of a solid, so when we say that something is wet, we mean that the liquid is sticking to the surface of a material.

Whether an object is wet or dry depends on a balance between cohesive and adhesive forces. Cohesive forces are attractive forces within the liquid that cause the molecules in the liquid to prefer to stick together. Cohesive forces are also responsible for surface tension. If the cohesive forces are very strong, then the liquid molecules really like to stay close together and they won't spread out on the surface of an object very much. On the contrary, adhesive forces are the attractive forces between the liquid and the surface of the material. If the adhesive forces are strong, then the liquid will try and spread out onto the surface as much as possible. So how wet a surface is depends on the balance between these two forces. If the adhesive forces (liquid-solid) are bigger than the cohesive forces (liquid-liquid), we say the material becomes wet, and the liquid tends to spread out to maximize contact with the surface. On the other hand, if the adhesive forces (liquid-solid) are smaller than the cohesive forces (liquid-liquid), we say the material is dry, and the liquid tends to bead-up into a spherical drop and tries to minimize the contact with the surface.

Water actually has pretty high cohesive forces due to hydrogen bonding, and so is not as good at wetting surfaces as some liquids such as acetone or alcohols. However, water does wet certain surfaces like glass for example. Adding detergents can make water better at wetting by lowering the cohesive forces . Water resistant materials such as Gore-tex fabric is made of material that is hydrophobic (water repellent) and so the cohesive forces within the water (liquid-liquid) are much stronger than the adhesive force (liquid-solid) and water tends to bead-up on the outside of the material and you stay dry. 

 

Too many american words 

5585.png

qb.png.ec0da22b87986bfb45114cbb72660ff1.png

4d5d1d937431f2eccb56d919153a35e7.png
 

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...